Product reliability b10d
Reliability of the pneumatic components used in safety systems b10 d values to use in application of EN ISO 13849-1 Reference: ISO 19973 - Pneumatic Fluid Power - Assessment of component reliability by testing
b10 d is the number of cycles until 10% of the components fail dangerously.
In pneumatic, mechanical and electromechanical technology, the life and reliability of components generally depends on wear linked to movements. Their life is also strongly affected by the working conditions, especially the following:
- Compressed air quality and conditions
- Lubricant compatibility with gaskets
- Environmental factors as such dust, gas and fluids.
It is vital for the component manufacturer's requirements to be complied with, otherwise the failure parameters are not valid. Product operating conditions are shown in Metal Work's General Catalogue.
Unless specified otherwise in the catalogue, compressed air must be class 3-4-3, in accordance with ISO 8573-1.
|PRODUCT FAMILY||B10 D [CYCLES]|
|ISO15552 cylinders, round cylinders, series RNDC, polyurethane gaskets||30.000 km
corresponding to 75x106 cycles with a reference stroke of 200mm
|ISO 15552 cylinders, round cylinders, series RNDC, low-temperature NBR and FKM gaskets||15.000 km
corresponding to 37x106 cycles with an average stroke of 200mm
|ISO6432 cylinders, SSC cylinders, compact cylinders, liner cylinders, stopper cylinders, polyurethane gaskets||60x106 cycles|
|ISO6432 cylinders, SSC cylinders, compact cylinders, liner cylinders, compact guided cylinders, low-temperature NBR and FKM gaskets||30x106 cycles|
|Flat Two cylinders||15 x106 cycles|
|Rodless cylinders||10.000 km
corresponding to 25x106 cycles with a reference stroke of 200mm
|Hydraulic brakes, series BKK, integrated hydraulic brake||5 x106 cycles|
|Other standard cylinders in the catalogue||Greater than or equal to 15 x106 cycles|
|Grippers series P1, P2, P3, P4, P7, P8, P9, P10, P11, GPLK||5 x106 cycles|
|Rotary actuators series R1, series R2, series R3, DAPK||10 x106 cycles|
|Slides series S10, series S11, series S12, series S13, series S14||10 x106 cycles|
|Guide units series GDH, series GDM, series GDS||15 x106 cycles|
|LEPK linear unit||15 x106 cycles|
|Electrical cylinders and electrical axis||it's depends on the application|
|Mechanical valves: series VME, series 70 MEV||2 x106 cycles|
|Manually-operated valves: series 70 MAV, series PEV pedal-operated, two-handed safety operation||1 x106 cycles|
|Pneumatic valves: series 70 PNV, series Mach 16 MPV, series Mach 11 MPV, series NAMUR, series ISO5599 IPV, series Mach 18 MPV||50 x106 cycles|
|Solenoid valves: series 70 SOV, series NAMUR, series PLT-10, series PIV.M, series PIV on base and in line, Cnomo, series Minimach, series Mach 11 MSV, series Mach 16 MSV, series Mach 18 MSV, series ISO5599 ISV, series 70 Safe air, series ISO5599 Safe air, series EB80, series HDM, series CM, series Multimach, series SOV-L||50 x106 cycles|
|Field bus (electronic only, without valves): All the interface expected for EB 80, all the interface expected for HDM, all the interface expected for CM, all the interface expected for Multimach.
EB80 and CM mangement modules of input and output, digital and analogical.
|100 x106 cycles|
|The working life is calculated as the number of opening/closing cycles for valves and regulators, and the number of downstream pressure changes from 6.3 to 0 bar for the other components. Filters, filter-purifiers, driers: series Syntesi, Bit, Skillair, New Deal, ONE||Infinite|
|Regulators and filters-regulators: Series Syntesi, Bit, Skillair,New Deal, ONE, GS, Regtronic, RML, RMC, RMS||10 x106 cycles|
|Lubricators: Series Syntesi, Skillair, Bit, New Deal||50 x106 cycles|
|V3V circuit shutoff valves: series Syntesi, Skillair, New Deal, ONE||10 x106 cycles|
|Progressive starters, APR: Series Syntesi, Skillair, ONE, VAP||10 x106 cycles|
|Pressure switches series PS, series 600, series 640||5 x106 cycles|
|MRF and RFL||50 x106 cycles|
|VSR||50 x106 cycles|
|VNR||50 x106 cycles|
|STP||50 x106 cycles|
|VCS||50 x106 cycles|
|VOR||50 x106 cycles|
|Pneumatic logic||50 x106 cycles|
Concesio, 23rd December 2009